Destination-Ip - Avaya G450 Cli Reference Manual

Example
To enter configuration mode for composite operation 13:
G450-001(QoS 440)# composite-operation 13
G450-001(QoS 440/CompOp 13)#
Related Commands - Packet sniffing
cookie, copy capture-file
policy-based routing, packet
Related Commands - Policy
cookie, destination-ip,
packet sniffing), name, owner,
show list, source-ip,
udp source-port

destination-ip

Use the destination-ip command to specify the destination IP address of packets to which
the current rule applies.
Use the not form of the command to specify that the current rule applies to all packets that do
not have this destination IP address.
Use the no form of the command to set the destination IP address to
Syntax
[not] destination-ip {host ip}|any|{ip wildcard}
no destination-ip
Parameters
Parameter
host
ip
ftp, copy capture-file
sniffing), owner,
dscp (policy), dscp-table, icmp,
show composite-operation,
tcp destination-port, tcp
Description
Keyword that specifies the current rule
applies to a single host IP address
The destination IP address of the rule
scp, copy capture-file
show ip capture-list, show upload status
ip-rule (policy, policy-based routing,
show dscp-table,
established, tcp source-port,
Policy - QoS lists
tftp, ip-rule (policy,
show isdn bri
udp destination-port,
.
any
Possible Default
Values Value
Issue 1 January 2008
link,
731