Object Tracking; Rtr - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands
DoS-classification,

Object tracking

rtr

Use the rtr command to enter RTR configuration mode and specify an identification number
for an RTR operation. Use the no form of this command to delete the RTR.
Note:
You cannot enter configuration mode for a specific RTR if this RTR is currently
Note:
probing an object. You must first deactivate the RTR using the no
rtr-schedule command.
Note:
You cannot delete an RTR being monitored by an object tracker. You must first
Note:
remove the link between them, using the no track track-id command.
Syntax
rtr rtr-id
Parameters
Parameter
rtr-id
User Level
read-write
Context
general
Example
To enter RTR configuration mode for RTR operation 1:
G450-001(config)# rtr 1
594 Avaya G450 CLI Reference
set security-association lifetime
Description
The RTR ID
Possible Values
1-30
Object tracking
Default Value