Dscp (Policy-Based Routing, Packet Sniffing, Vpn) - Avaya G450 Cli Reference Manual

Related Commands - Policy-based routing
dscp (policy-based routing, packet sniffing,
next-hop-list, show isdn bri link
Related Commands - Policy
composite-operation,
isdn bri link, source-ip,
destination-port,
Related Commands - VPN
description (ip rule),
show ip crypto-list

dscp (policy-based routing, packet sniffing, VPN)

Use the dscp command to specify the DSCP value that is set by the current policy operation.
Use the not form of the command to specify that the current operation set any DSCP value
other than this value.
Use the no form of the command to specify that the current operation set the DSCP value to
.
any
Note:
In crypto-lists, this command is only applicable for rules whose action is no
Note:
protect.
Syntax
dscp {dscp_value | any}
not dscp dscp_value
no dscp
Parameters
Parameter
dscp_value
any
dscp (policy), show
tcp destination-port,
udp source-port
ip crypto-list, ip-rule
Description
The DSCP value
Keyword indicating that any DSCP
value will match the rule.
Using this keyword is equivalent to
specifying no dscp.
VPN), next-hop (policy-based
dscp-table, icmp, show
tcp established, tcp
(VPN), local-address,
Policy-based routing
routing), show ip
composite-operation,
source-port, udp
protect crypto map, source-ip,
Possible Default
Values Value
0-63
Issue 1 January 2008
show
773