Set Max-Length - Avaya G450 Cli Reference Manual

Parameters
Parameter
digits
User Level
read-write
Context
sls > dial-pattern
Examples
To insert the digits "9719" to the dialed string:
G450-001(super-sls-incoming-routing <tgnum>)# set insert-digits 9719
To remove the digit-treatment (removes data administered with
G450-001(super-sls-incoming-routing <tgnum>)# set insert-digits ""
Related Commands
clear dial-pattern, dial-pattern,
set tgnum, set type

set max-length

Use the set max-length command to establish the maximum length of the dialed string in
SLS.
Syntax
set max-length length
Description
0-36 digits/special characters to insert at the
beginning of the dialed string.
Note: The special character ',' (comma)
designates that a pause of "X" seconds is to be
sent between the digits that are being
transmitted out to the PSTN facility. The value
of "X" has a default of 1.5 seconds in Avaya
Communication Manager administration. This
setting may be changed.
You may not insert ',' as the first character in
the dialed string. In addition, you can use ','
only on analog and non-ISDN digital trunks.
set delete-digits,
(dial-pattern), show
set deny, set max-length,
(dial-pattern), show dial-pattern,
SLS survivability
Possible Default
Values Value
" " (no digits " "
inserted)
0-9 plus '*' ,
'#', and ','
set insert-digits (dial-pattern)):
set min-length,
show sls, sls
Issue 1 January 2008
set sls,
955