Set Country-Protocol - Avaya G450 Cli Reference Manual

CLI Commands
Syntax
set bearer-cability bearer
Parameters
Parameter
bearer
User Level
read-write
Context
sls > ds1
sls > bri
Example
To set the Information Transfer Rate field to speech for DS1:
G450-001 (sls-ds1-<port address>)# set bearer-capability speech
To set the Information Transfer Rate field to speech for BRI:
G450-001 (sls-bri-<port address>)# set bearer-capability speech
Related DS1 commands
clear ds1, set
interface, set interface-companding,
signaling-mode,

set country-protocol

Use the set country-protocol command to specify the ISDN Layer-3 country protocol
type in SLS.
Note:
This command is only valid for a BRI circuit or DS1 circuit employed with ISDN.
Note:
Syntax
set country-protocol country-code
926 Avaya G450 CLI Reference
Description
The Information Transfer Rate field of
the Bearer Capability IE.
3khz – 3.1kHz audio encoding
●
speech – Speech encoding
●
bearer-capability, set
set sls, show (ds1),
channel-numbering, set
set long-timer, set name,
show ds1, show sls,
SLS survivability
Possible
Values
3khz
speech
connect, set country-protocol,
set protocol-version,
sls
Default
Value
speech
set
set side, set