Ppp Pap Refuse - Avaya G450 Cli Reference Manual

PPPoE (PPP over Ethernet)
User Level
read-write
Context
Interface: Console, FastEthernet (PPP L2, PPP L2-L3), Serial (DS1 PPP L2, DS1 PPP L2-L3,
USP PPP L2, USP PPP L2-L3) Dialer (L2, L2-L3), USB-modem
Example
To enable DNS information requests from the remote peer during the PPP/IPCP session:
G450-001(config-if:FastEthernet 10/2)# ppp ipcp dns request
Related Commands
ip address negotiated

ppp pap refuse

Use the ppp pap refuse command to prevent authentication with PAP, even when a
pap-sent password is configured.
Syntax
ppp pap refuse
no ppp pap refuse
User Level
read-write
Context
interface:FastEthernet, Dialer (L2, L2-L3)
Example
To prevent authentication with PAP:
G450-001(super-if:FastEthernet 10/2)# ppp pap refuse
Related Commands
ppp chap refuse
Issue 1 January 2008 825