Rtp-Stat Qos-Trap-Rate-Limit - Avaya G450 Cli Reference Manual

rtp-stat qos-trap-rate-limit

Use the rtp-stat qos-trap-rate-limit command to configure the QoS trap rate limiter.
The trap rate limiter limits the rate at which QoS traps are sent to the SNMP trap manager on
the MGC. The trap rate limiter uses a token bucket scheme, in which traps are sent only if there
are tokens in a virtual bucket. Tokens are added to the bucket every token interval, which sets
the maximum long term trap rate. Each time a trap is sent, the number of tokens in the bucket
decrements. The bucket size is the maximum number of tokens that the bucket can hold. The
bucket size limits the trap burst size.
Syntax
rtp-stat qos-trap-rate-limit token-interval bucket-size
Parameters
Parameter
token-interval
bucket-size
User Level
read-write
Context
general
Example
To limit the QoS trap rate to a token every 10 hundredths of a second up to 50 tokens:
G450-001(super)# rtp-stat qos-trap-rate-limit 10 50
Related Commands
rtp-stat clear, rtp-stat
rtp-stat-service,
sessions, show rtp-stat
Description
The interval, in hundredths of seconds,
between additions of a token to the bucket
The maximum number of tokens stored in the
bucket
event-threshold,
rtp-stat threshold, show rtp-stat
summary, show rtp-stat
rtp-stat fault, rtp-stat min-stat-win,
config, show rtp-stat
thresholds, show rtp-stat traceroute
RTP statistics
Possible Default
Values Value
10-100000 1000
1-1000 5
rtp-stat qos-trap,
detailed, show rtp-stat
Issue 1 January 2008 907