Ip Ssh - Avaya G450 Cli Reference Manual

CLI Commands
Context
general
Example
To set the CLI prompt to GTW-HQ:
G450-001(super)# hostname GTW-HQ
GTW-HQ-001(super)# hostname
Session hostname is 'GTW-HQ'
To reset the CLI prompt to the default:
GTW-HQ-001(super)# no hostname
G450-001(super)#
Related Commands
banner login, banner
terminal length,

ip ssh

Use the ip ssh command to enable the Secure Shell (SSH) service. SSH is a security
protocol that enables you to establish a remote session over a secured tunnel, also called a
remote shell. Use the no form of the command to disable the SSH service, and close any open
connections currently using SSH. When disabling the service, the G450 issues a message
listing all current management interfaces. If SSH is currently the only enabled management
interface, the user is warned that the remote connection will be lost.
Note:
For normal execution of SSH protocol, the G450 must first be assigned host
Note:
name identification. Use the hostname command to assign host name
identification.
Note:
In order to enable SSH to be used, you must configure the server host key. See
Note:
the crypto-key generate command.
Syntax
[no] ip ssh
User Level
admin
1118 Avaya G450 CLI Reference
post-login, clear
terminal width
screen, line, show banner
SSH protocol
login, show banner post-login,