Show Slot-Config - Avaya G450 Cli Reference Manual

CLI Commands
Parameters
Parameter
list
User Level
read-write
Context
sls
Example
To list all administered signaling groups:
(In this example, trunk group 98 is administered on a DS1 module, managed by signaling group
10, in slot v4. Two additional DS1 facilities located in slot v5 and slot v6 share an NFAS
managed group, managed by signaling group 12. The NFAS group D-channel is in the slot v5
DS1 module. All trunk members are contained in trunk group 100.)
G450-001(super-sls)# show sig-group all
Sig-group Tg-Select Assoc-Sig Prime-Dchan Nfas-Modules/Nfas-Id
--------- --------- --------- ----------- ---------------------------------
10
12
Related Commands
add nfas-interface,
primary-dchannel,

show slot-config

Use the show slot-config command to list the slot and board administration in the media
gateway for SLS.
Syntax
show slot-config
1006 Avaya G450 CLI Reference
Description
The administered signaling groups to list:
all – Lists all administered signaling groups
●
sgnum – Lists only the specified signaling
●
group
98 yes
100 no
clear sig-group, remove
set sls, set trunk-group-chan-select,
005v424 -
005v524 005v5:0,005v6:1
nfas-interface, set associated-signaling,
show sls, sig-group,
SLS survivability
Possible Default
Values Value
all all
sgnum
set
sls