CLI Commands
framing
Use the framing command to specify the frame type for an E1 or T1 data line. Use the no form
of the command to restore the controller to the default frame type.
Syntax
framing frame_type
no framing
Parameters
Parameter
frame_type
User Level
read-write
Context
interface:Controller
Example
To set the frame type to extended super frame:
G450-001(super-controller:5/1)# framing esf
Related Commands
clear controller
source, ds-mode, fdl,
remote,
show
364 Avaya G450 CLI Reference
Description
The framing method to use
counters, controller,
interface
serial,
controllers,
show controllers
Possible Values
sf, esf, crc4,
no-crc4, unframed
cablelength
long,
cablelength
ip
address,
linecode
remote,
show ds-mode
E1/T1 interfaces
Default
Value
For T1: sf
For E1: crc4
short, channel-group,
(E1),
linecode
(T1), loopback,
clock