Ip Access-Group - Avaya G450 Cli Reference Manual

CLI Commands
Example
To show detailed information about access control list 330:
G450-001(ACL 330)# show list
Index Name
----- -------------- ------------
330 SplitPriority
ip options: Permit
ip fragments : Permit
Index Protocol
----- --------
22 tcp
Deflt Any
Related Commands - Policy-based routing
ip-rule (policy, policy-based routing, packet
Related Commands - Policy
composite-operation, cookie, dscp-table, ip-fragments-in, ip-option-in,
policy-based routing, packet
show isdn bri link,

ip access-group

Use the ip access-group command to activate a specific Access Control list for a specific
direction, on the current interface. Use the no form of this command to suspend the Access
Control list for a specific direction.
Note:
You cannot edit the active Access Control list.
Note:
Syntax
ip access-group policy_list_number direction
no ip access-group direction
710 Avaya G450 CLI Reference
Owner
Admin
IP Wildcard
--- -----------
Src Any
Dst Any
Src Any
Dst Any
sniffing), name, owner,
show list
Port Operation-
----- ----------
Any Permit
Any
Any Permit
Any
sniffing), name, owner,
show composite-operation,
Policy - access control lists
show isdn bri link
ip-rule (policy,
show dscp-table,