Avaya G450 Cli Reference Manual page 909

rtp-stat threshold {codec-rtt|rtt|jitter|remote-jitter} milliseconds
rtp-stat threshold echo-return-loss db
no rtp-stat threshold
{all|codec-loss|average-codec-loss|codec-rtt|echo-return-loss|loss|
average-loss|remote-loss|average-remote-loss|rtt|jitter|remote-loss|
echo-return-loss}
Parameters
Parameter
codec-loss
average-codec-loss
loss
average-loss
remote-loss
average-remote-loss
percentage
Description
Keyword specifying to set the
percentage of time the codec plays fill
frames due to lack of valid RTP frames.
Possible causes include jitter and
packet loss.
Keyword specifying to set the average
codec loss measurement since the
beginning of the RTP stream
Keyword specifying to set the estimated
network RTP packet loss.
The VoIP engine evaluates the current
received packet loss every RTCP
interval — usually 5 to 8 seconds. The
VoIP engine postpones loss estimation
until the next interval if the number of
packets received is less than the
minimum statistic window. The
minimum statistic window is configured
with the CLI command rtp-stat
min-stat-win.
Keyword specifying to set the average
packet loss evaluation since the
beginning of the RTP stream
Keyword specifying to set the network
loss according to the remote RTP
receiver. The device learns of the
remote packet loss from received RTCP
messages.
Keyword specifying to set the average
remote network loss measurement
since the beginning of the RTP stream
The percent value
RTP statistics
Possible Default
Values Value
0.0-100.0
Issue 1 January 2008 909