Set Connect - Avaya G450 Cli Reference Manual

set connect

Use the set connect command to specify the equipment at the far-end of the DS1 link in
SLS.
Note:
This command is only valid for DS1.
Note:
Syntax
set connect far-end
Parameters
Parameter
far-end
User Level
read-write
Context
sls > ds1
Example
To specify that the central office is at the far-end of the DS1 link:
G450-001 (sls-ds1-<port address>)# set connect network
Related Commands
clear ds1, set bearer-capability,
interface, set interface-companding,
signaling-mode,
Description
The equipment at the far-end of the DS1 link:
host – Data application (computer or server)
●
lineside – Terminal equipment (video
●
multiplexer)
network – Central office
●
pbx – Private communication system (another
●
pbx)
set bit-rate,
set
set sls, show (ds1), show
set channel-numbering,
long-timer, set name,
ds1, show sls, sls
SLS survivability
Possible
Values
host
lineside
network
pbx
set country-protocol,
set protocol-version, set
Issue 1 January 2008
Default
Value
network
set
side, set
967