Area - Avaya G450 Cli Reference Manual

Related Commands
ip ospf authentication,
hello-interval, ip ospf
ospf router-id, show ip
neighbor, show ip protocols

area

Use the area command to configure the area ID of a router. Use the no form of the command
to delete the area ID.
Syntax
[no] area area_id [stub]
Parameters
User Level
read-write
Context
Router OSPF
Example
To configure an area for this OSPF interface with IP address 192.168.49.1:
G450-001(router:ospf)# area 192.168.49.1
To configure a stub area for this OSPF interface with IP address 176.1.13.12:
G450-001(router:ospf)# area 176.1.13.12 stub
To remove the area with IP address 192.168.49.1:
G450-001(router:ospf)# no area 192.168.49.1
Related Commands
default-metric (OSPF),
ip ospf authentication-key,
message-digest-key,
ospf, show ip ospf
Parameter Description
The IP address
area_id
Keyword indicating to
stub
configure a stub area
network (OSPF), passive-interface,
ip ospf cost, ip ospf
ip ospf network point-to-multipoint,
database, show ip ospf
Possible
Values
redistribute
dead-interval, ip ospf
ip ospf priority,
interface, show ip ospf
Default
Value
(OSPF), timers spf
Issue 1 January 2008
OSPF
ip
625