Ip Rip Authentication Key - Avaya G450 Cli Reference Manual

CLI Commands
Note:
To define a name that includes spaces, enclose the entire name in quotation
Note:
marks (for example, "New York").
User Level
read-write
Context
general
Example
To specify Jane Wiley as the owner of distribution list 78:
G450-001(super)# ip distribution access-list-owner 78 "Jane Wiley"

ip rip authentication key

Use the ip rip authentication key command to set the authentication string used on the
current interface. Use the no form of this command to clear the password.
Syntax
ip rip authentication key password
no ip rip authentication key
Parameters
Parameter
password
User Level
read-write
Context
interface:Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3, DS1 FR-SUB L3,
USP PPP L2-L3, USP PPP L3), FastEthernet (L2-L3, L3, PPP L2-L3, PPP L3), VLAN (L2-L3,
L3), Loopback (L2-L3, L3), Tunnel (L2-L3, L3), Dialer (L2-L3, L3)
858 Avaya G450 CLI Reference
Description
The authentication string for the interface
Possible Default
Values Value
string
(1-16 chars)
RIP