Show Snmp Engineid - Avaya G450 Cli Reference Manual

CLI Commands
SNMPv3 Notification Status
----------------------------
Traps: Enabled
Informs: Enabled
SNMP-Rec-Address Model
---------------- -----
149.49.70.137
UDP port: 162 DM
Related Commands - SNMP access configuration
ip snmp, set snmp
snmp group, show snmp
usertogroup, show snmp
group, snmp-server
Related Commands - SNMP trap configuration
set port trap, set snmp trap enable | disable
show port trap,
snmp-server host,
Related Commands - Dynamic trap manager
snmp-server dynamic-trap-manager

show snmp engineID

Use the show snmp engineID command to display the SNMP engine ID for the G450.
Syntax
show snmp engineid
User Level
admin
Context
general
1070 Avaya G450 CLI Reference
Retries: 3
Level
------
v1 noauth
community, set snmp
retries, show snmp
view, snmp-server
remote-user, snmp-server
show snmp, snmp trap
snmp-server informs
Timeout: 3 seconds
Notification Trap/Inform
------------ -----------
all
retries, set snmp timeout,
timeout, show snmp
community, snmp-server
user, snmp-server view
auth, set snmp trap enable | disable
link-status, snmp-server enable
SNMP access configuration
User name
----------
trap ReadCommN
show snmp engineID,
user, show snmp
engineID, snmp-server
frame-relay,
notifications,
show