Show Snmp Timeout - Avaya G450 Cli Reference Manual

Example
To display the number of retry attempts:
G450-001(super)# show snmp retries
the SNMP Retries Number is 100
Related Commands - SNMP access configuration
ip snmp, set snmp
engineID, show snmp
show snmp view,
snmp-server remote-user,
Related Commands - SNMP trap configuration
set port trap, set snmp trap enable | disable
show port trap,
snmp-server host,

show snmp timeout

Use the show snmp timeout command to display the time to wait before resending a
communication.
Syntax
show snmp timeout
User Level
read-only
Context
general
Example
To display the timeout value:
G450-001(super)# show snmp timeout
the SNMP Timeout is 60
Related Commands - SNMP access configuration
ip snmp, set snmp
engineID, show snmp
show snmp view,
snmp-server remote-user,
community, set snmp
group, show snmp
snmp-server community,
snmp-server
show snmp, snmp trap
snmp-server informs
community, set snmp
group, show snmp
snmp-server community,
snmp-server
retries, set snmp timeout,
timeout, show snmp
snmp-server engineID,
user, snmp-server view
auth, set snmp trap enable | disable
link-status, snmp-server enable
retries, set snmp timeout,
retries, show snmp
snmp-server engineID,
user, snmp-server view
SNMP access configuration
show snmp, show snmp
user, show snmp usertogroup,
snmp-server group,
frame-relay,
notifications,
show snmp, show snmp
user, show snmp usertogroup,
snmp-server group,
Issue 1 January 2008 1073