Set Send-Name - Avaya G450 Cli Reference Manual

CLI Commands
Parameters
Parameter
type
User Level
read-write
Context
sls > trunk-group
Example
To specify the numbering plan for the current trunk as public:
G450-001 (sls-trunk-group-<tgnum>)# set numbering-format public
Related Commands
add port, clear
cbc-service-feature,
set digits, set digit-handling,
set japan-disconnect,
trunk-hunt, set

set send-name

Use the set send-name command to define whether or not the calling, connected, called, or
busy party's administered name is sent to the network on outgoing or incoming calls in SLS.
Note:
Leave the setting of method to be no, since sending a Calling Party Name is a
Note:
future feature.
Note:
This command only applies to ISDN trunks.
Note:
1056 Avaya G450 CLI Reference
Description
The numbering plan for the current trunk.
unknown – Both the Numbering Plan
●
Indicator and Type of Number are unknown
public – The Numbering Plan Indicator meets
●
the E.164 standard and the Type of Number
is national
tac, clear trunk-group,
set channel-preference,
set digit-treatment,
set name, set send-name,
sls, show (trunk-group),
remove port, set cbc,
set codeset-display,
set incoming-destination,
set send-number,
show sls, show trunk-group
SLS survivability
Possible
Values
unknown
public
set cbc-parameter, set
set codeset-national,
set incoming-dialtone,
set supervision,
sls, trunk-group
Default
Value
unknown
set dial,
set tac, set