Rsvp; Set Qos Rsvp - Avaya G450 Cli Reference Manual

CLI Commands

RSVP

set qos rsvp

Use the set qos rsvp command to set the current values for the RSVP parameters of the
VoIP engines. The parameters that can be set are enabled or disabled, refresh rate in seconds,
failure retry yes or no, and service profile (guaranteed-service or controlled load service).
Note:
The set qos rsvp command will not take effect unless QoS source setup is
Note:
local.
Syntax
set qos rsvp {enable | disable} | {refresh secs} | {failure {retry |
noretry}} | {profile {guaranteed | controlled}}
Parameters
Parameter
enable
disable
secs
retry
noretry
guaranteed
controlled
User Level
read-write
Context
general
896 Avaya G450 CLI Reference
Description
Keyword indicating to enable RSVP in the router
Keyword indicating to disable RSVP in the router
The refresh time in seconds
Keyword indicating to retry upon failure
Keyword indicating no retry upon failure
Keyword indicating to use the guaranteed service
profile
Keyword indicating to use the controlled load service
profile
RSVP
Possible Default
Values Value
1-99 15