Context
sls
>
sig-group
Example
To remove gateway 3 with module v5 from the NFAS-managed DS1 group:
G450-001(sls-sig-group 100)# remove nfas-interface 005v5
Related Commands
add
nfas-interface,
trunk-group-chan-select,
set associated-signaling
Use the set associated-signaling command to specify whether the D-channel is
physically present in the DS1 interface in SLS.
Note:
If this command is invoked to change the transmission rate and the DS1 facility
Note:
and associated signaling group have already been provisioned, the command is
blocked and a warning message, "Administrative change is in violation with
existing trunk member provisioning", is displayed.
Syntax
set associated-signaling {yes | no}
Parameters
Parameter
yes
no
User Level
read-write
Context
sls
>
sig-group
clear
sig-group,
set
associated-signaling,
show
(sig-group),
Description
Keyword specifying the D-channel is present in the
same DS1 interface. This is the default.
Keyword specifying to use Non-Facility Associated
Signaling (NFAS)
set
primary-dchannel,
show
sig-group,
show
SLS survivability
set
sls,
sls, sig-group,
sls
Default Value
Issue 1 January 2008
set
1015