Set Qos Control - Avaya G450 Cli Reference Manual

User Level
read-write
Context
general
Example
To set the BBE differentiated services code point to 43:
G450-001(super)# set qos bearer bbedscp 43
Related Commands
set qos control,

set qos control

Use the set qos control command to define the source for QoS control parameters. The
source can be either local where the user configures the values via the CLI, or remote in which
case the values are obtained from the media gateway controller. The default value is remote.
Syntax
set qos control {local | remote}
Parameters
Parameter
local
remote
User Level
read-write
Context
general
set qos signal, show qos-rtcp
Description
Keyword that specifies to configure QoS
values via the CLI
Keyword that specifies to obtain QoS values
from the media gateway controller
Possible Default
Values Value
Issue 1 January 2008
QoS
839