Name - Avaya G450 Cli Reference Manual

Example
To specify that rule 22 applies to all packets whose source port is greater than port 95:
G450-001(ACL 330/ip rule 22)# udp source-port gt 95
To specify that rule 22 applies to all packets whose source port is less than or equal to port 95:
G450-001(ACL 330/ip rule 22)# not udp source-port gt 95
Related Commands - Policy-based routing
destination-ip, dscp (policy-based routing, packet sniffing,
capture-list, source-ip,
Related Commands - Policy
composite-operation, destination-ip,
dscp-table, show isdn bri
udp destination-port
Related Commands - VPN
description (ip rule), destination-ip,
icmp, ip crypto-list, ip-protocol,
show ip crypto-list,

name

Use the name command to assign a name to the specified list or operation. Use the no form of
the command to return the name to the default value.
Syntax
[no] name name
Parameters
Parameter
name
User Level
read-write
tcp destination-port,
dscp
link, source-ip,
dscp (policy-based routing, packet sniffing,
ip-rule
tcp destination-port,
Description
The name of the list or operation.
Note: If you wish to include spaces in the
description, you must enclose the string in
quotation marks ("").
VPN), icmp, ip-protocol,
tcp source-port,
(policy), icmp, show
tcp destination-port,
(VPN), local-address,
tcp source-port, udp destination-port
Policy - QoS lists
udp destination-port
composite-operation,
tcp established, tcp
VPN), fragment,
protect crypto map, source-ip,
Possible Values
String of 1-31
characters
Issue 1 January 2008
show ip
show
source-port,
Default
Value
751