Set Name - Avaya G450 Cli Reference Manual

set name

Use the set name command to identify the username for a station, a trunk group, a DS1, or
ISDN facility in SLS.
Syntax
set name name
Parameters
Parameter
name
User Level
read-write
Context
sls > station
sls > trunk-group
sls > ds1
sls > bri
Examples
To set the username Joe Smith for a given station:
G450-001 (sls-station-<extension>)# set name "Joe Smith"
Related Commands - Station commands
set cor, set expansion-module,
set type (station),
Description
The name as specified on the corresponding
Communication Manager form (add
trunk-group n). This name is typically used to
identify an individual, a service provider, or a site.
If the file name includes spaces, use quotes.
The length of the name is:
DS1 and BRI: 1 -15 characters
●
station and trunk-group: 1-27 characters
●
set password,
show (station), station
set port, set swhook-flash,
SLS survivability
Possible Default
Values Value
set trunk-destination,
Issue 1 January 2008 973