Show Ip-Rule - Avaya G450 Cli Reference Manual

CLI Commands
Context
ip qos-list, ip qos-list dscp-table, ip qos-list ip-rule
Example
To display the entire DSCP table:
G450-001(QoS 444)# show dscp-table
Trust configuration is trust-cos
DSCP Action
---- -------------------- ---------- ------------
0 No-Change
1 No-Change
2 No-Change
3 No-Change
4 No-Change
5 No-Change
6 No-Change
7 No-Change
8 No-Change
9 No-Change
10 No-Change
11 No-Change
.
.
.
63 No-Change
Related Commands
composite-operation, cookie, dscp-table,
name, owner,

show ip-rule

Use the show ip-rule command to display the attributes of a specific rule. Leave the
rule_number parameter blank to display all rules.
Syntax
show ip-rule [rule_number]
756 Avaya G450 CLI Reference
Precedence
mandatory
mandatory
mandatory
mandatory
mandatory
mandatory
mandatory
mandatory
mandatory
mandatory
mandatory
mandatory
mandatory
show composite-operation,
Name
DSCP#0
DSCP#1
DSCP#2
DSCP#3
DSCP#4
DSCP#5
DSCP#6
DSCP#7
DSCP#8
DSCP#9
DSCP#10
DSCP#11
DSCP#63
ip-rule (policy, policy-based routing, packet
show isdn bri link, show list
Policy - QoS lists
sniffing),