Ip-Protocol - Avaya G450 Cli Reference Manual

CLI Commands
Note:
The not form of the command is not relevant in the crypto-list ip-rule context.
Note:
Example
To specify that rule 27 applies to ICMP error-reply packets:
G450-001(ACL 333/ip rule 27)# icmp Echo-Reply
To specify that rule 33 applies to any ICMP packet type except type 1 code 2:
G450-001(ACL 333/ip rule 33)# not icmp 1 2
Related Commands - Policy-based routing
destination-ip,
capture-list, source-ip,
source-port
Related Commands - Policy
composite-operation, cookie, destination-ip,
policy-based routing, packet
show isdn bri link,
destination-port,
Related Commands - VPN
description (ip
ip crypto-list, ip-protocol,
crypto-list, tcp

ip-protocol

Use the ip-protocol command to specify that the current rule applies to packets having the
specified IP protocol.
Use the no form of the command to set the IP protocol to its default value.
Use the not form of this command to specify that the current rule applies to all packets except
those having the specified IP protocol.
Syntax
[not] ip-protocol protocol_name | protocol_number
no ip-protocol
736 Avaya G450 CLI Reference
dscp (policy-based routing, packet sniffing,
tcp destination-port,
sniffing), owner,
show list, source-ip,
udp source-port
rule), destination-ip, dscp (policy-based routing, packet sniffing,
ip-rule (VPN), local-address,
destination-port, tcp source-port,
VPN), ip-protocol,
tcp source-port,
dscp (policy), dscp-table, icmp,
show composite-operation,
tcp destination-port, tcp
protect crypto
udp destination-port,
Policy - QoS lists
show ip
udp destination-port, udp
ip-rule (policy,
show dscp-table,
established, tcp source-port,
VPN), fragment,
map, source-ip,
udp source-port
udp
show ip