Set Snmp Timeout - Avaya G450 Cli Reference Manual

CLI Commands
Context
general
Example
To set the system to make 100 retry attempts:
G450-001(super)# set snmp retries 100
Related Commands - SNMP access configuration
ip snmp, set snmp
snmp group, show snmp
usertogroup, show snmp
group, snmp-server
Related Commands - SNMP trap configuration
set port trap, set snmp trap enable | disable
show port trap,
snmp-server host,

set snmp timeout

Use the set snmp timeout command to specify the time to wait for a response before
retrying the communication.
Syntax
set snmp timeout time
Parameters
Parameter
time
User Level
read-write
Context
general
1068 Avaya G450 CLI Reference
community, set snmp
retries, show snmp
view, snmp-server
remote-user, snmp-server
show snmp, snmp trap
snmp-server informs
Description
The number of seconds to wait
timeout, show snmp,
timeout, show snmp
community, snmp-server
user, snmp-server view
auth, set snmp trap enable | disable
link-status, snmp-server enable
SNMP access configuration
show snmp engineID,
user, show snmp
engineID, snmp-server
frame-relay,
notifications,
Possible Default
Values Value
1-100000
show