Radius Authentication; Clear Radius Authentication Server - Avaya G450 Cli Reference Manual

CURRENT STATE
---------------------------------------------------------
In Use : 20 of
VoIP -DSPs PARAMETERS
VoIP Child
Slot Board
---- -----
1 VOIP
2 VOIP
3 -- Not Installed --
4 SYNC
Related Commands - VoIP
busyout voip-dsp,
test voip-dsp
Related Commands - QoS
set qos bearer,

RADIUS authentication

clear radius authentication server

Use the clear radius authentication server command to clear the primary or
secondary RADIUS server IP address.
Syntax
clear radius authentication server {primary|secondary}
Parameters
Parameter
primary
secondary
100 channels, 240of 1200 points (0.0% used)
CODE SUFFIX HW
VINTAGE
---- ------ -------
8122 A 3
7119 A 5
campon-busyout voip-dsp,
set qos control, set qos
Description
Keyword specifying to clear the primary
RADIUS server
Keyword specifying to clear the secondary
RADIUS server
FW Chan
VINTAGE InUse
-------- -------
235 20/80
215 0/20
release voip-dsp,
signal, show qos-rtcp
RADIUS authentication
Admin Oper
State State
----- -----
Release InUse
Busyout Idle
reset voip-dsp, show voip-dsp,
Possible Default
Values Value
Issue 1 January 2008
Fault
Status
------
No Error
No Error
843