Timers Spf - Avaya G450 Cli Reference Manual

User Level
read-write
Context
Router: ospf
Example
To redistribute static routing information into OSPF:
G450-001(router:ospf)# redistribute static
Related Commands - OSPF
area, default-metric
Related Commands - Route redistribution
default-metric (interface route metric value)

timers spf

Use the timers spf command to configure the delay between SPF calculations when using
OSPF. Use the no form of this command to restore the default value.
Syntax
timers spf spf_holdtime
no timers spf
Parameters
Parameter
spf_holdtime
User Level
read-write
Context
Router: ospf
(OSPF), network (OSPF), passive-interface,
Description
The time in seconds of the delay between
SPF calculations
timers spf
Possible Default
Values Value
1-3600 3
Issue 1 January 2008
OSPF
629