Set Spantree Priority - Avaya G450 Cli Reference Manual

CLI Commands
Parameters
Parameter
seconds
User Level
read-write
Context
general
Example
To keep information messages for 20 seconds before discarding:
G450-001(super)# set spantree max-age 20
bridge max age is set to 20.
Related Commands
set port spantree,
spantree priority,
forward-delay,
spantree version,

set spantree priority

Use the set spantree priority command to set the bridge priority for the spanning tree.
Syntax
set spantree priority bridge_priority
Parameters
Parameter
bridge_
priority
1108 Avaya G450 CLI Reference
Description
The value must be between
2 * (Bridge-hello-time + 1) and
2 * (Bridge-forward-delay - 1). The
recommended value is 20.
set port spantree cost,
set spantree default-path-cost,
set spantree hello-time,
show spantree
Description
The number representing the
priority of the bridge
set port spantree force-protocol-migration,
set spantree enable |
set spantree priority, set spantree
Possible Values
0 (high)-65535 (low) in
increments of 4096
Spanning tree
Possible Default
Values Value
6-40
set port
disable, set spantree
tx-hold-count, set
Default
Value