Ip Telnet-Client - Avaya G450 Cli Reference Manual

CLI Commands
Note:
The ip telnet command is a secured command and will not be displayed
Note:
together with the running configuration (using the show running-config
command). To see the status of this command, use the show protocol
command (refer to
Syntax
ip telnet [port port_number]
no ip telnet
Parameters
Parameter
port
port_number
User Level
admin
Context
general
Related Commands
ip telnet-client,

ip telnet-client

Use the ip telnet-client command to enable the Telnet client. Use the no form of the
command to disable the Telnet client.
Note:
For security reasons, this command can only be executed from the console port.
Note:
Note:
The ip telnet command is a secured command and will not be displayed
Note:
together with the running configuration (using the show running-config
command). To see the status of this command, use the show protocol
command (refer to
1136 Avaya G450 CLI Reference
show protocol
Description
Keyword that changes the default port of the Telnet
server
The number of the new port for the Telnet server
ip telnet-services, show ip
show protocol
on page 351).
telnet, telnet
on page 351).
Telnet access
Possible Default
Values Value
1-65535 23