Show Trunk-Group - Avaya G450 Cli Reference Manual

Field
Cor
Trk-Des
Exp-Mod
Flash
Passwd
Related Commands
clear station, set
swhook-flash, set

show trunk-group

Use the show trunk-group command to display trunk group administration in SLS.
Syntax
show trunk-group list
Parameters
Parameter
list
Description
The Class of Restriction. Possible classes include:
emergency
●
internal
●
local
●
toll
●
unrestricted
●
Indicates whether to permit (
means that an expansion module is administered for this
Yes
station; means that there is no expansion module associated
no
with this station
means that SLS will recognize the switchhook flash on this
Yes
station; means that flashing the switchhook has no effect
no
Asterisks (*) indicate an administered password. See
for password requirements on IP endpoints. If the field is blank, no
password is administered for this extension.
cor, set expansion-module,
trunk-destination, set type
Description
The administered trunk groups to list:
all – Lists all administered trunk groups
●
trunk-group – Lists only the numbered trunk
●
group
extension + n – Lists the numbered trunk
●
group + "n" entries
) or deny (
yes
set name, set password,
(station), show sls, station,
SLS survivability
) the call
no
set password
2 of 2
set port, set sls, set
sls
Possible Default
Values Value
all all
trunk-group
extension + n
Issue 1 January 2008 1009