Example
To display all the administered dial patterns in SLS:
G450-001(super-sls-incoming-routing 99)# show
Match-pattern
------------------ ------ --- ------------------ ------- -----
Output fields
Field
Match-pattern
Length
Del
Insert-Digits
Mode
tgnum
Related Commands
bri, dial-pattern,
set attendant
Use the set attendant command to set an attendant access code for the purpose of call
routing in SLS. Incoming trunk calls that have dialed strings that can not be completely routed,
are routed by SLS to this attendant position. In addition, stations in the branch office may
directly dial this attendant using the access-code.
Syntax
set attendant access-code extension
Length Del Insert-Digits
234
7
3
Description
The beginning digit pattern of the incoming alphanumeric
dial string to be matched
The length of the dialed string
The number of digits to be deleted from the beginning of
the dialed string for an inbound trunk call
The number of digits to be inserted from the beginning of
the dialed string for an inbound trunk call
The protocol for receiving incoming digits. Possible
values:
enbloc (all digits in SETUP message)
●
overlap (not all digits available in the SETUP
●
message; some digits delivered in subsequent
INFO message)
The ISDN (t1isdn or e1isdn) trunk group number
ds1
incoming-routing,
,
Mode
5381000
set
sls,
show
sls, sig-group, station, sls,
SLS survivability
tgnum
enbloc
99
trunk-group
Issue 1 January 2008
987