Snmp-Server Informs - Avaya G450 Cli Reference Manual

CLI Commands
Context
general
Example
To identify an SNMP management server with host 10.1.2.4, connecting through udp-port 789,
sending informs to its host using v3 SNMP functionality, authenticating messages with the
username John, and having generic traps and configuration change notifications enabled:
G450-001(super)# snmp-server host 10.1.2.4 informs v3 auth John udp-port 789
config generic
Related Commands - SNMP access configuration
ip snmp, set snmp
engineID, show snmp
snmp usertogroup,
snmp-server group,
Related Commands - SNMP trap configuration
set port trap, set snmp trap enable | disable
show port trap,

snmp-server informs

Related Commands - Dynamic trap manager
snmp-server dynamic-trap-manager
snmp-server informs
Use the snmp-server informs command to configure settings for SNMP inform messages.
Syntax
snmp-server informs retries retries-num timeout timeout
1096 Avaya G450 CLI Reference
community, set snmp
group, show snmp
show snmp view,
snmp-server remote-user,
show snmp, snmp trap
retries, set snmp timeout,
retries, show snmp
snmp-server community,
snmp-server
auth, set snmp trap enable | disable
link-status, snmp-server enable
SNMP trap configuration
show snmp, show snmp
timeout, show snmp
snmp-server engineID,
user, snmp-server view
frame-relay,
notifications,
user, show