Set Port Redundancy-Intervals - Avaya G450 Cli Reference Manual

CLI Commands

set port redundancy-intervals

Use the set port redundancy-intervals command to configure the two time constants
that determine redundancy switchover parameters.
Syntax
set port redundancy-intervals min_time_between_switchovers
{switchback_interval | none}
Parameters
Parameter
min_time_
between_
switchovers
switchback_
interval
none
User Level
read-write
Context
general
Example
To specify a delay of 100 milliseconds before switching to the backup port, and a requirement
that the primary port be up for 20 milliseconds before control is returned:
G450-001(super)# set port redundancy-intervals 100 20
Related Commands
set port redundancy,
806 Avaya G450 CLI Reference
Description
The minimum time, in milliseconds,
between redundancy switchovers for
each pair
The period, in milliseconds, the
primary port link has to be up before
the system switches back.
Specify 0 to indicate the system never
switches back.
Specify 1 to indicate that switchback
occurs immediately after the primary
port link returns.
Keyword indicating not to switch
set port redundancy enable|disable,
Port redundancy
Possible
Values
0-65000
0-65000
show port redundancy
Default
Value