Set Logging Server - Avaya G450 Cli Reference Manual

CLI Commands

set logging server

Use the set logging server command to define a new Syslog output server for remote
logging of system messages. A maximum of three Syslog servers can be configured. A new
Syslog server is created in disabled mode.
Syntax
set logging server ip_address
Parameters
Parameter
ip_address
User Level
read-write
Context
general
Example
To define a Syslog server at IP address 147.2.3.66:
G450-001(super)# set logging server 147.2.3.66
Related Commands
clear logging file,
logging server
logging session,
condition
548 Avaya G450 CLI Reference
Description
The IP address of the Syslog server
clear logging server,
condition, set logging server enable |
show logging file content,
set logging file, set logging server
disable,
show logging server
Possible Default
Values Value
access-level,
set logging server facility,
condition, show logging session
Logging
set
set