Set Directory-Number-B - Avaya G450 Cli Reference Manual

Example
To assign directory number 3035381000 to the B1 channel of the BRI interface:
G450-001(sls-bri <port address>)# set directory-number-a 3035381000
Related Commands
bri, clear bri, set
set interface, set
spid-b, set sls,

set directory-number-b

Use the set directory-number-b command to assign a directory number to the B2
channel of the BRI interface in SLS.
!
Important:
This number must be identical to the provisioned number that the network
Important:
provider has assigned to this circuit.
Note:
This command is valid only for a BRI circuit employed with ISDN.
Note:
Syntax
set directory-number-b number
Parameters
Parameter
number
User Level
read-write
Context
sls > bri
Example
To assign directory number 3035381004 to the B2 channel of the BRI interface:
G450-001(sls-bri <port address>)# set directory-number-b 3035381004
bearer-capability, set
interface-companding,
set tei-assignment, show
Description
String of 1-10 digits describing the directory
number to the B2 channel of the BRI interface
country-protocol, set directory-number-b,
set layer1-stable, set
bri, show (bri), show
SLS survivability
set endpoint-init,
name, set side, set spid-a,
sls, sls
Possible
Values
0-9
Issue 1 January 2008
set
Default
Value
929