Set Name - Avaya G450 Cli Reference Manual

CLI Commands
User Level
read-write
Context
sls > bri
Example
To not keep the physical layer active between calls:
G450-001(sls-bri <port address>)#
Related Commands
bri, clear bri, set
directory-number-b,
side, set spid-a,

set name

Use the set name command to identify the username for a station, a trunk group, a DS1, or
ISDN facility in SLS.
Syntax
set name name
Parameters
Parameter
name
User Level
read-write
934 Avaya G450 CLI Reference
bearer-capability, set
set endpoint-init, set
set spid-b, set sls, set
Description
The name as specified on the corresponding
Communication Manager form (add
trunk-group n). This name is typically used to
identify an individual, a service provider, or a site.
If the file name includes spaces, use quotes.
The length of the name is:
DS1 and BRI: 1 -15 characters
●
station and trunk-group: 1-27 characters
●
set layer1-stable
country-protocol, set directory-number-a,
interface, set interface-companding,
tei-assignment, show
SLS survivability
no
set
set name,
bri, show (bri), show sls,
Possible
Values
set
sls
Default
Value