Set Length - Avaya G450 Cli Reference Manual

CLI Commands
Parameters
Parameter
digits
User Level
read-write
Context
sls > incoming-routing
Examples
To insert the digits "9719" to the dialed string:
G450-001(sls-dial-pattern <dialed-string>)# set insert-digits 9719
To remove the digit-treatment (removes data administered with
(incoming-routing)):
G450-001(sls-dial-pattern <dialed-string>)# set insert-digits ""
Related Commands
clear incoming-routing, incoming-routing,
show (incoming-routing),

set length

Use the set length command to specify the length of the dialed string in SLS.
Note:
There is an actual service offered in some public networks, such as in Japan,
Note:
where the ISDN Called Party Number IE's 'Number Digits' table entry in octet 4
has no information. In order to program the Incoming Routing Table to handle this
case, the pattern field in set match-pattern should be set to "", and the
length field in set length should be set to "0". This indicates that there has
been a successful match, and that the digits field in set insert-digits will
be used to provide the destination number so that the SLS dial plan may route
this incoming call.
Syntax
set length length
984 Avaya G450 CLI Reference
Description
0-16 digits/special characters to insert at
the beginning of the dialed string
show incoming-routing,
Possible
Values
" " (no digits inserted)
0-9 plus '*' and '#'
set delete-digits, set length,
show sls, sls
SLS survivability
set insert-digits
set match-pattern,
Default
Value
" "
set sls,