Network (Rip) - Avaya G450 Cli Reference Manual

CLI Commands
Parameters
Parameter
access_list_
number
type
interface_
type
interface_
number
protocol
User Level
read-write
Context
Router: rip
Example
To apply distribution access list 10 to incoming router updates on the VLAN 1 interface:
G450-001(router:rip)# distribution-list 10 in "Vlan 1"
To apply distribution access list 20 to outgoing router updates on the Serial 3/1:1 interface:
G450-001(router:rip)# distribution-list 20 out "Serial 3/1:1":
To apply distribution access list 40 to outgoing router updates from OSPF:
G450-001(router:rip)# distribution-list 40 out ospf
Related Commands
default-metric

network (RIP)

Use the network command to specify a list of networks on which the RIP is running. Use the
no form of this command to remove an entry.
Syntax
[no] network ip_address [wildcard_mask]
866 Avaya G450 CLI Reference
Description
The number of the access list
The type of the access list
The interface type
The interface number
The protocol. This parameter is only
relevant for outgoing list entries.
(RIP), network (RIP), redistribute (RIP), timers basic
Possible Default
Values Value
1-99
in, out
static,
ospf
RIP