Set Spantree Tx-Hold-Count - Avaya G450 Cli Reference Manual

User Level
read-write
Context
general
Example
To set the bridge priority to 4096:
G450-001(super)# set spantree priority 4096
Bridge priority set to 4096.
Related Commands
set port spantree,
spantree priority,
forward-delay,
spantree version,

set spantree tx-hold-count

Use the set spantree tx-hold-count command to set the value in packets used by the
spanning tree in order to limit the maximum number of BPDU's transmitted during a hello-time
period.
Syntax
set spantree tx-hold-count rate
Parameters
Parameter
rate
User Level
read-write
Context
general
set port spantree cost,
set spantree default-path-cost,
set spantree hello-time,
show spantree
Description
Recommended value is 3
set port spantree force-protocol-migration,
set spantree enable |
set spantree max-age,
Possible Values
1-10
Spanning tree
disable, set spantree
set spantree tx-hold-count,
Default Value
Issue 1 January 2008
set port
set
1109