Show Logging Server Condition - Avaya G450 Cli Reference Manual

Example
To display contents of the message file for all message facilities and severities:
G450-001(super)# show logging file content
CLI-Notification: root: exit
CLI-Notification: root: exit
CLI-Notification: root:
SECURITY-Warning: Unauthorized Access from IP address = 0.0.0.0, User = super,
Protocol = 23
CLI-Notification: root: exit
Related Commands
clear logging file,
access-level, set logging server
facility, set logging

show logging server condition

Use the show logging server condition command to display the filter conditions that
have been defined for the Syslog output sink. If an IP address or hostname is not specified, the
configuration of all of the Syslog servers is displayed.
Syntax
show logging server condition [ip_address | hostname]
Parameters
Parameter
ip_address
hostname
User Level
read-only
Context
general
ip
clear logging server, set logging
condition,
session, show logging server
Description
The IP address of the Syslog server
The name of the Syslog server host
file, set logging
set logging server enable |
condition, show logging session condition
server, set logging server
disable, set logging server
Possible Default
Values Value
Issue 1 January 2008
Logging
557