Keepalive-Icmp Interval - Avaya G450 Cli Reference Manual

Parameters
Parameter
failure-
retries-
number
User Level
read-write
Context
interface:FastEthernet
Example
To set the number of consecutive failed keepalive packets necessary to set the interface's
keepalive status as down to 3:
G450-001(if:FastEthernet 10/2)# keepalive-icmp failure-retries 3
Related Commands
keepalive-icmp,
success-retries,

keepalive-icmp interval

Use the keepalive-icmp interval command to set the interval (in seconds) between
keepalive packets. Using this command without a parameter resets the interval value to the
default value.
Syntax
keepalive-icmp interval seconds
Parameters
Parameter
seconds
Description
The number of failed keepalive packets
required
keepalive-icmp interval,
keepalive-icmp timeout,
Description
The interval time (in seconds)
keepalive-icmp source-address,
show keepalive-icmp
ICMP keepalive
Possible Default
Values Value
1-32 4
keepalive-icmp
Possible Default
Values Value
1-36 5
Issue 1 January 2008 459