Port Classification; Set Port Classification - Avaya G450 Cli Reference Manual

CLI Commands
Parameters
Parameter
list_number
User Level
read-only
Context
general, interface:Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR-SUB L2, DS1 FR-SUB L2-L3,
USP PPP L2, USP PPP L2-L3), FastEthernet (L2, L2-L3), VLAN (L2, L2-L3), Loopback (L2,
L2-L3), Tunnel (L2, L2-L3), Dialer (L2, L2-L3)
Example
To display information about pbr-list 801 in detail:
G450-001(super)# show ip pbr-list 801 detailed
Related Commands
ip next-hop-list,

Port classification

set port classification

Use the set port classification command to set the port classification to either regular
or valuable. Any change in the Spanning Tree state from Forwarding for a valuable port will
erase all learned MAC addresses in the media gateway.
Syntax
set port classification module/port {regular | valuable}
798 Avaya G450 CLI Reference
Description
The pbr-list number to display
ip pbr-group, ip pbr-list,
Possible
Values
800-899
show ip active-lists, show ip active-pbr-lists
Port classification
Default
Value