CLI Commands
show (sig-group)
Use the show command to list the parameters of this signaling group.
Syntax
show
User Level
read-write
Context
sls
>
sig-group
Example
To list all of the subcontext parameters in the
G450-001(sls-sig-group 100)# show
Sig-group Tg-Select Assoc-Sig Prime-Dchan Nfas-Modules/Nfas-Id
--------- --------- --------- ----------- --------------------
10
Output fields
Field
Sig-group
Tg-Select
Assoc-Sig
Prime-Dchan
Nfas-Modules
Nfas-Id
1018 Avaya G450 CLI Reference
98
yes
005v424
Description
Signaling group number
The trunk-group number that can accept incoming calls in
cases where the Information Channel Selection field does
not specify a preferred channel for bearer transport
Whether the D-channel is physically present in the DS1
interface
The D-channel number
The DS1 modules that are controlled by the primary
D-channel.
The DS1 circuit number that is associated with the NFAS
group.
sig-group
context:
SLS survivability
-