CLI Commands
CAM table
clear cam
Use the clear cam command to delete all entries from the Contents Address Memory (CAM)
table.
Syntax
clear cam
User Level
read-write
Context
general
Example
To clear the CAM table:
G450-001(super)# clear cam
CAM table cleared.
Related Commands
show
cam,
show cam mac
show cam
Use the show cam command to display the CAM table entries for a specific module and port. If
no module or port is specified, the system displays all CAM table entries.
Note:
MACs associated with LAGs appear under the LAG ID, not under the LAG port.
Note:
Syntax
show cam [module[/port]]
202 Avaya G450 CLI Reference
CAM table