Set Spantree Enable | Disable - Avaya G450 Cli Reference Manual

set spantree enable | disable

Use the set spantree command to enable or disable the spanning-tree algorithm for the
media gateway.
Note:
When you disable spanning tree, blocking ports are disabled in order to prevent
Note:
loops in the network. As a result, you need to wait 30 seconds before disabling
spanning tree if you reset the media gateway, enable spanning tree, or insert a
new station.
Syntax
set spantree {enable|disable}
Parameters
Parameter
enable
disable
User Level
read-write
Context
general
Example
To enable spanning tree:
G450-001# set spantree enable
bridge spanning tree enabled.
Related Commands
set port spantree,
spantree priority,
hello-time, set spantree
version, show spantree
Description
Keyword specifying to enable the
spanning-tree algorithm
Keyword specifying to disable the
spanning-tree algorithm
set port spantree cost,
set spantree default-path-cost,
max-age, set spantree
set port spantree force-protocol-migration,
set spantree forward-delay,
priority, set spantree
Spanning tree
Possible Default
Values Value
set port
set spantree
tx-hold-count, set spantree
Issue 1 January 2008 1105