Ip Rtp Port-Range - Avaya G450 Cli Reference Manual

Related Commands
clear ip rtp header-compression,
compression-connections,
port-range, ip tcp
header-compression

ip rtp port-range

Use the ip rtp port-range command to set the range of UDP ports considered as RTP on
the current interface. Set the range to be identical to the peer's configuration.
Some vendors use port range 49,152 through 65,535. For interoperability, the same port range
should be used.
Syntax
[no] ip rtp port-range min max
Parameters
Parameter
min
max
User Level
read-write
Context
interface:Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR-SUB L2, DS1 FR-SUB L2-L3,
USP PPP L2, USP PPP L2-L3), Dialer (L2, L2-L3, L3)
Example
To specify that ports in the range 49,152 through 65535 are RTP ports:
G450-001(if:Serial 3/1:1.1)# ip rtp port-range 49152 65535
Related Commands
clear ip rtp header-compression,
compression-connections,
non-tcp-mode,
header-compression
clear ip tcp
ip rtp header-compression,
compression-connections,
brief, show ip tcp header-compression
Description
The starting port range to be considered RTP
The ending port range to be considered RTP
clear ip tcp
ip rtp header-compression,
ip tcp compression-connections,
brief, show ip tcp header-compression
header-compression,
ip rtp max-period,
show ip rtp header-compression,
header-compression,
ip rtp max-period,
show ip rtp header-compression,
IPHC header compression
ip rtp
ip rtp max-time,
show ip rtp
Possible Default
Values Value
1025-65535 2048
1025-65535 65535
ip rtp
ip rtp max-time,
show ip rtp
Issue 1 January 2008
ip rtp
ip rtp
509