Show Ip Tcp Header-Compression - Avaya G450 Cli Reference Manual

CLI Commands
Name
Max Time
Max Period
Packets Sent
Bytes Saved
Improvement
Factor
Related Commands
clear ip rtp header-compression,
compression-connections,
non-tcp-mode,
header-compression,

show ip tcp header-compression

Use the show ip tcp header-compression command to display TCP header
compression statistics for a specific interface. If no interface is specified, it shows TCP header
compression statistics for all interfaces.
Syntax
show ip tcp header-compression [interface_name]
Parameters
Parameter
interface_name
User Level
read-only
Context
general
514 Avaya G450 CLI Reference
Description
The maximum number of seconds between two full header packets
The maximum number of compressed packets sent between two full
header packets
The number of compressed packets sent + the number of full
headers sent
The total saving in bytes due to compression
The efficiency of the compression, calculated as (bytes saved +
bytes sent)/ bytes sent (rounded to two decimal places)
clear ip tcp
ip rtp header-compression,
ip rtp port-range, ip tcp
show ip tcp header-compression,
Description
The name of the interface
header-compression,
ip rtp
compression-connections,
show ip tcp header-compression brief
IPHC header compression
ip rtp
max-period, ip rtp max-time,
show ip rtp
Possible
Values
2 of 2
ip rtp
Default
Value