Ip Policy-List-Copy - Avaya G450 Cli Reference Manual

Parameters
Parameter
policy_list_number
direction
User Level
read-write
Context
interface:Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR-SUB L2, DS1 FR-SUB L2-L3,
USP PPP L2, USP PPP L2-L3), Loopback (L2, L2-L3), FastEthernet (L2, L2-L3, PPP L2,
PPP L2-L3, PPP L3), Tunnel (L2, L2-L3), VLAN (L2, L2-L3), Dialer (L2, L2-L3)
Example
To enable access control list 310 for outbound packets on the FastEthernet interface:
G450-001(if:FastEthernet 10/2)# ip access-group 310 out
Related Commands
ip access-control-list,
show ip access-control-list,

ip policy-list-copy

Use the ip policy-list-copy command to copy an existing policy list to a new list.
Note:
The source and destination lists must be of the same type. For example, you
Note:
cannot copy an access control list to a QoS list.
Syntax
ip policy-list-copy source_list destination_list
Description
The Access Control list number
The direction of the packets to
which the policy is applied
ip policy-list-copy, ip qos-group,
show ip qos-list
Policy - access control lists
Possible
Values
300-399
in, out
ip qos-list, ip simulate, pre-classification,
Issue 1 January 2008
Default
Value
300
711