Fragment - Avaya G450 Cli Reference Manual

CLI Commands
Example
To specify that composite operation 17 sets the DSCP value of packets to 55:
G450-001(QoS 440/CompOp 17)# dscp 55
To specify that composite operation 17 sets the DSCP value of packets to a value other than 55:
G450-001(QoS 440/CompOp 17)# not dscp 55
Related Commands - Policy
composite-operation, destination-ip, icmp,
source-ip, tcp
source-port, cos,

fragment

Use the fragment command to apply the current rule for non-initial fragments only.
Note:
You cannot specify TCP/UDP ports or ICMP code/type for a rule when using the
Note:
fragment command.
Syntax
fragment
User Level
read-write
Context
ip qos-list composite-operation, ip capture-list ip-rule, ip pbr-list ip-rule,
ip access-control-list ip-rule, ip qos-list ip-rule, ip crypto-list ip-rule
Example
To apply the rule for non-initial fragments:
G450-001(super-Capture 520/ip rule 15)# fragment
Related Commands - Packet sniffing
dscp (policy-based routing, packet sniffing,
capture-list, source-ip,
source-port
688 Avaya G450 CLI Reference
destination-port, tcp established,
name
tcp destination-port,
show composite-operation,
tcp source-port, udp
VPN), destination-ip, icmp, ip-protocol,
tcp source-port, udp
Policy - access control lists
show isdn bri link,
destination-port, udp
show ip
destination-port, udp